ยี่ห้อ
 
หมวดสินค้า
 
50 สินค้าคนดูมากสุด
 
แท็กสินค้า
โมดูลาร์ อแด็ปเตอร์ 1:2 (6P4C) คอนเน็คชั่น โมดูล 2/10 (แบบโปรไฟ Test Plug 2 Poles (ไต้หวัน) โมดูลาร์ อแด๊ปเตอร์ ตัวเมีย 1:2 ดิสคอนเน็คชั่น โมดูล 2/10 (โครเน ขาสแตนเลส 1 ขา (ความลึก 22 มม.) โมดูลาร์ อแด็ปเตอร์ 1:3 (6P4C) สายโทรศัพท์แบน 4 คอร์ (100 เมตร ดิสคอนเน็คชั่น โมดูล 2/10 (แบบโป อุปกรณ์เชื่อมต่อพักสายโทรศัพท์ อาร์เรสเตอร์ 3 โพล (พร้อม Failed Test Plug 4 Poles (ไต้หวัน) โมดูลาร์ บ๊อก (ขนาดกลาง) 6P4C เครื่องมือเข้าสายโทรศัพท์ โครเน่ แม็กกาซีน สำหรับ อาร์เรสเตอร์ 3 คอนเน็คชั่น โมดูล 2/10 (โครเน่) เครื่องมือเข้าสายโทรศัพท์ (ไต้หว Test Plug 4 Poles (โครเน่) บ๊อกพักสายโทรศัพท์ขนาด 30 คู่สาย ลาเบล โฮลเดอร์ 2/10 โมดูลาร์ บ๊อก (ขนาดใหญ่) 6P4C Test Plug 2 Poles (โครเน่) Disconnection Module สายครอสโทรศัพท์ (ขาว - แดง) ขนาด ดีสคอนเนคเตอร์
 
อัตราแลกเปลี่ยน
 
สถิติ

เริ่ม :25 กย. 2553
 
ตะกร้าสินค้า
0 รายการ
 
นาฬิกา
 
สินค้าของเรา
 
ไปรษณีย์ไทย
 
สินค้าน่าสนใจ
 
DBD Registered

 

16E1-Eth Access Gateway Mux

16E1-Eth Access Gateway Mux
กดเพื่อขยายขนาด
ราคา: 0.00 บาท
สถานะสินค้า: สั่งของก่อน
โมเดล: CL-GW16
ความนิยมเฉลี่ย: ยังไม่มีอัตราความนิยม

   
Product Name: 16E1-Eth Access Gateway Mux
Product Model: CL-GW16
Description:
Overview:
CL-GW16 16E1 GATEWAY is the a multi-E1 convergence-type bridge equipment, it provides 16 E1 and 4 FE interfaces, possesses Channel convergence function, according to the different bandwidth can divide into 1~16 Channel. Each Channel is composed of one or multi-E1 lines, the Channel as the link unit carries the Ethernet data transparently, and it has the function which is similar to EPON, any Channel under the user need can set up isolation or communication. Make use of the Channel as the link unit what is composed of E1 lines can realize point to point or point to multi-point flexible networking, and meet the users’ variety of bandwidth and centralized network management needs.

CL-GW16 16E1 GATEWAY not only provides complete alarm instructions of the line side and the Ethernet side, but also provides the error rate statistics, timeout warning, Ethernet traffic statistics management or other exhaustive management information. Network management approach respectively provide based on WEB, PC interface which based on TCP / IP, and library files which based on SNMP to build the  SNMP network management that can be unified operation and management.
CL-GW16 16E1-Eth Access Gateway Mux point to multipoint
Feature:
   Provide 16 E1 interfaces, and 4 FE Interfaces.
Support 1 ~ 16 Channel division configuration, each Channel is composed of 1~16 E1 that have been specified by users, the Channel as link unit point to point carrying Ethernet data transparently and independently.
Support one point to multi-point applications (Channel number is greater than 1), and point to point networking applications (Channel number is equal to 1), up to one point to 16-point networking application.
Under the point to multi-point mode, support the different manufactures’ single E1 Bridge and multi-E1 Bridge as the remote device mixed networking application.
When Channel is composed of one E1, it compatible with single-E1 bridge equipment that is realized by CL-EOP and CL-C  protocol converter.
When Channel is composed of two or more than two E1 lines, it compatible with multi-E1 Bridge equipment that is realized by CL-C series, and will also compatible with all Bridge device that from different manufacturers but supports the EOP protocol.
Support communication between any Channel, and can set isolation or communication according to the user’s need.
Each Channel supports 802.1Q Tag VLAN and QinQ function.
The Ethernet data from Channel completes frame re-sequencing technology at the E1 line side, effectively guarantees the frame sequence and improves the transmission efficiency.
The maximum transmission delay is 64ms between any two E1 lines in Channel, it can guarantee steady operation under kinds of complex networks.
Each E1 line only costs 64Kbps overhead.
The Channel automatically detects available E1 lines in it, and automatically allocates bandwidth.
The Channel supports each E1 line to set CRC error threshold in it, when one line’s error rate exceeds the threshold, the system can automatically shut down the E1 line for isolation.
The Channel achieves a one-way off-isolation in it, only cuts off the E1 line that over the BER threshold, and the other direction of transmission is not affected, Ethernet data can be asymmetrically transmitted in both direction, in order to ensure the maximum data transmission efficiency when the E1 line goes wrong.
When one direction of E1 line received a LOSS or AIS alarm in Channel, the sending direction of the E1 line will not be affected, then realizes the asymmetric transmission on the E1 line.
When receiving direction of all the E1 lines are cut off in Channel at the same time, local alarm and network management information can still be transmitted to remote via sending direction, achieves a one-way transmission on E1 line. This feature is particularly suitable for protocol converter cooperates with optical communication equipment. It can judge the faults of the lines when the optical communication equipment appears a one-way fiber cases.
 
Support loop-back and loop-back protection of each E1 line.
Support Ethernet packets statistics function.
Support local system to control each remote E1 loop-back.
Support the transfer function of full fault alarm.
Support BERT testing function of E1 line.
Support remote alarm indication.
Support particular Ethernet packet statistics function.
Support WEB network management features, support network interface of the PC which based on TCP / IP, open SNMP library files, support the customer to complete network management that based on SNMP.
 
Specification:
Protocol:  G.703, G.704, G.736, G.823, I.431 IEEE802.3
Subject
Description
Bit rate
2.048Mb/s±50ppm
Code format
HDB3
Impedance
75 Ohm is default, Optional 120 Ohm
Jitter transfer, Jitter tolerance comply with ITU-T G.703、G.704、G.823 recommendations
 
Electrical Ethernet Interface
Subject
Description
Connector
RJ-45
Working mode
Auto - negotiation is the default setting
Complies with IEEE 802.3 and 10/100 Base-Tx Ethernet Protocol
 
Ethernet parameters
Subject
Description
Remark
MAC address table capacity
1K  
MAC aging time
five minutes  
Minimum frame-length
64 bytes  
Maximum frame-length
1916 bytes  
Working mode
Support auto-negotiation compliant to IEEE802.3u.
Enabled as default
 
 
Configured via Web network management
VLAN function
Disabled as default
Flow control
Enabled as default
Bandwidth
≈n×E1(n=0~16)
Default is 16×E1 ≈31.68Mbps
 
E1 interface
Subject
Description
Bit rate
2.048Mb/s±50ppm
Code format
HDB3
Impedance
75 Ohm is default, Optional 120 Ohm
Jitter transfer, Jitter tolerance comply with ITU-T G.703、G.704、G.823 recommendations
 
Dimension, weight and power consumption
Subject
Description
Dimension
434mm×44mm×155mm(width× height× depth)
Weight
3.5 kg
Power consumption
8W±10%
 
Environmental requirements
Subject
Description
Operating temperature
-5℃~45℃
Storage temperature
-40℃~70℃
Humidity
≤95%,free from condensing


CL-GW16 SNMP NMS:


                                CL-GW16 NMS main interface

CL-GW16 16E1-Eth Access Gateway Mux nms
                            CL-GW16 NMS E1 Channel E1 Group configuration
 

Application:

 
 
Order Info.:

Model 
Description
CL-GW16
4Eth support Vlan,16E1 uplink  can work with CL-EOP and CL-C converter,support Web SNMP NMS
 
Compatible With Cutelink CL-C and CL-EOP Protocol Converter
CL-C1100
10/100M Base-T to E1, 75/120ohm, (N*64K)framed/(2M)UnFramed,Support Vlan,AC220V or DC-48V
      CL-C4200 4*10/100MBase-T to 4E1, 75/120ohm, framed,AC220V+DC-48V(4 Ethernet ports,4E1 Ports)
     CL-C8400 4*10/100M to 8E1, 75/120ohm, framed,AC220V+DC-48V(4 Ethernet ports,8E1 Ports)
CL-EOP4/8/16 CL-EOP4/8/16, Ethernet to 4/8/16E1 converter with components of ‘EOP4 /8/16motherboard +4/8 E1 card +4Ethernet port LAN cards
เขียนความคิดเห็น
ชื่อ:


ความคิดเห็น: คำแนะนำ: HTML จะไม่ถูกแปลง!

ความนิยม: แย่            ดี

ป้อนรหัสในกล่องข้างล่างนี้:

ไม่มีรูปภาพเพิ่มเติมสำหรับสินค้านี้