SFP Transceivers-Small Form Factor Pluggable Transceivers
กดเพื่อขยายขนาด |
|
SFP Transceivers-Small Form Factor Pluggable Transceivers
Features : -
- Hot-pluggable
- Compact size, enabling high port density in each hosting device.
- High-performance and cost-effective
- SFP package with SC connector
- 1310nm FP Tx/1550nm PIN Rx and 1550nm FP TX/1310nm PIN RX
- 10Km ~ 20Km transmission with Single-mode fiber
- +3.3V single power supply and TTL logic interface
- LVPECL compatible data input/output interface
- Low EMI and excellent ESD protection
- Eye safety, laser Class I safety standard, IEC-60825 compliant
- Compatible with RoHS
Descriptions : -
SFP (small form-factor pluggable) or mini-GBIC input/output transceivers are compact and hot-pluggable for converting optical and electrical media; it is widely used for both data communication and telecommunication applications. Moreover, this SFP are fully compliant with the SFP MSA (Multisource Agreement) specifications, and specially designed to support SONET, Ethernet, Fiber Channel, and other communications standards.
This transceiver supports dual data-rate of 1.25Gbps/1.0625Gbps and transmission distance up to 120km with SMF (Single-mode Fiber) or 550m with MMF (multi-mode fiber). The SFP Transceivers consist of two sections: The transmitter section incorporates a FP laser or a DFB laser, while the receiver section consists of a PIN photodiode integrated with a TIA (trans-impedance preamplifier ).
All modules in the SFP Transceivers are satisfying Class I Laser Safety requirements. The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault indicates that degradation of the laser. Loss of signal (LoS) output indicates the loss of an input optical signal of receiver.
The SFP Transceivers is compatible with Cisco, Huawei, Juniper, H3C, Broadcom, ZTE switch, etc.
Specification : -
Specifications:
Absolute Maximum Rating:
Parameters | Symbol | Min. | Max. |
Storage Temperature (°C) | Tst | -40 | +85 |
Operating Temperature (°C) | Top | 0 | +70 |
Supply Voltage (V) | Vcc | 0 | +3.6 |
Input Voltage | Vin | GND | Vcc |
Lead Soldering Temperature Time (°C/s) | 240/10 |
Operation Environment:
Parameters | Symbol | Min. | Max. |
Supply Voltage (V) | Vcc | 3.15 | 3.45 |
Ambient Operating Temperature (°C) | Top | 0 | +70 |
Operating Relative Humidity | - | 5 | 95 |
Optical and Electrical Characteristics:
Parameter | Symbol | Min. | Typ. | Max. | |
Transmitter | |||||
Data Rate (Mb/s) | - | - | 155 | - | |
Center Wavelength (nm) | 1310 Tx | lo | 1270 | 1310 | 1350 |
1550 Tx | 1480 | 1550 | 1580 | ||
Output Spectral Width (nm) | Dl | - | - | 4 | |
Average Optical Output Power (dBm) | Po | -8 | - | -3 | |
Extinction Ratio (dB) | Er | 10 | - | - | |
Rise/Fall Time(20%~80%) (ns) | Tr/Tf | 0.26 | |||
Total Jitter (UI) | Tj | 0.43 | |||
Optical Eye Diagram | IEEE 802.3z and ANSI Fiber Channel Compatible | ||||
Input Differential Impendence (Ω) | Zdiff | 100 | |||
TX Disable (V) | Disable | 2.0 | Vcc | ||
Enable | 0 | 0.8 | |||
Fault (V) | Fault | 2.0 | Vcc+0.8 | ||
Normal | 0 | 0.8 | |||
Receiver | |||||
Data Rate (Mb/s) | - | - | 155 | - | |
Center Wavelength (nm) | 1550 Rx | λ | 1480 | 1550 | 1580 |
1310 Rx | 1270 | 1310 | 1350 | ||
Max. Input Power (dBm) | Pmax | -3 | - | -8 | |
Receiver Sensitivity | Pmin | - | -25 | -23 | |
Output Differential Impendence (Ω) | Zdiff | 100 | |||
Loss Thresholds | LOSSD | - | - | -41 | |
LOSSA | -44 |
Applications : -
|
ความคิดเห็น: คำแนะนำ: HTML จะไม่ถูกแปลง!
ความนิยม: แย่ ดี
ป้อนรหัสในกล่องข้างล่างนี้: