Description:
Overview:
The SW804 Fast Ethernet Switch provides the power of switching with the ease of use and affordability of traditional shared hubs. Truly Plug-and-Play, the SW804 Fast Ethernet Switch automatically learns about the devices on your network and configures itself, without complicated setup procedures. Dramatic improvements in performance can easily be seen, with speeds of up to 200Mbps per port. Since full bandwidth capability is achieved on each individual port, the congestion problems of shared hubs are easily avoided.
Employing a Buffered Store-and-Forward transmission method with Back Pressure and Flow Control ensures maximum reliability. For added sturdiness, these switches are housed in steel casings and can be rack mounted using the included Rackmount kit. SW804 Fast Ethernet Switch comes with 8-switched RJ45 or fiber optical ports. Powerful enough to run your network’s backbone, yet so easy they can be used in place of your desktop hubs, let DaShi Crop. and the versatile SW804 Fast Ethernet Switch bring the power of switching to you.
Feature:
1. Ideal for Integrating the 10/100Mbps or 100BaseFX Ports. Provide Dedicated Bandwidth in Half or Full-Duplex Modes
2. Transparent transfer all protocols such as TCP/IP, IPX, XNS, Appletalk, Vines, DECnet, ARP, DECLAT and Lansoft etc.
3. Compatible with All Major Network Operating Systems
4. Advanced Store-and-Forward Packet Switching Optimizes Data Transfers
5. Full wire-speed layer 2 switch on all ports
6. Support port-based VLANs
7. 1M Buffer Memory
8. Internal 1k MAC address table
- Auto address learning
- Auto address aging (default 300 Seconds)
9. Supports both Full/Half duplex ports
10. Flow control capabilities
11. Automatic Transmit delay control capabilities and maximum delay guarantee
12. Broadcast flood filtering
13. Filtering/Forwarding/Learning Rates
14. 2.0 Gbps aggregate bandwidth with speeds of up to 200Mbps per port
15. Support Comprehensive At-a-Glance LED’
16. Standard
IEEE 802.3 10BASE-T
IEEE 802.3U 100BASE-TX, 100BASE-FX
IEEE 802.1Q VLAN
IEEE 802.1p Priority Queue
IEEE 802.1x
Specification:
Power
|
AC Input
|
100~240V
|
DC Input
|
-48V
|
Power Consumption
|
≤3W
|
Ethernet ports
|
Standard: IEEE 802.3, 802.3u.10/100M electrical Port, MDI/MDIX auto negotiation, Half/ full duplex
|
Qty
|
1 RJ45 connector
|
Fiber interface
|
Rate
|
155Mbps
|
Line code
|
1B1C
|
Wavelength
|
850nm/1310nm/1550nm
|
Connector
|
FC/SC
|
Distance
|
0-120Km
|
Environment
|
Operation Temperature
|
0°C~50°C
|
Operation Relative Humidity
|
20~90%
|
Store Temperature
|
-20°C~65°C
|
Store Relative Humidity
|
10~95%
|
Application:
Order Info.:
wavelength
|
connector
|
TP port
|
Fiber
|
TX power(dBm)
|
Sensitivity (dBm)
|
Max distance
|
1310nm
|
SC
|
RJ-45
|
multimode
|
-22 to -12
|
≤ -30
|
2km
|
1310nm FP
|
SC/FC/ST
|
RJ-45
|
Singlemode Double fiber
|
-15 to -8
|
≤ -37
|
25km
|
1310nm FP
|
SC/FC/ST
|
RJ-45
|
Singlemode Double fiber
|
-8 to -3
|
≤ -37
|
40km
|
1310nm FP
|
SC/FC/ST
|
RJ-45
|
Singlemode Double fiber
|
-3 to 0
|
≤ -37
|
60km
|
1550nm DFB
|
SC/FC/ST
|
RJ-45
|
Singlemode Double fiber
|
-8 to -3
|
≤ -40
|
80km
|
1550nm DFB
|
SC/FC/ST
|
RJ-45
|
Singlemode Double fiber
|
-3 to 0
|
≤ -40
|
100km
|
1550nm DFB
|
SC/FC/ST
|
RJ-45
|
Singlemode Double fiber
|
0 to 3
|
≤ -40
|
120km
|
|